Images are for illustration purposes only. Actual product may vary.
Tile Saw Bench (only) hire
From £34.60/day
(inc VAT)
Price per day when you hire for a week or longer
Everything you need to know about Tile Saw Bench (only) hire
Description
This is the professional 1000mm bridge saw bench without a blade fitted. Hire the table, rails and cutting head, then add the diamond blade that matches the material at checkout.
The 1000mm cutting table, extending legs and swivel-mounted head give contractors a proper on-site cutting station for ceramic, porcelain, natural stone, masonry and concrete-based slabs. The head runs on linear bearings along two rigid stainless steel rails, so the cut stays square across the full length instead of wandering as the carriage travels. You push or pull the head by hand. Cutting height is set with the handwheel on top of the head. The head swivels for angle cuts up to 45°.
Four carry handles (two at each end) make it practical to move around site. Legs extend for a working height that is usable on uneven compound. 110v throughout — add a transformer at checkout if the site supply is 240v.
No blade is included. There is no bundled blade and no wear / resharpening deposit on this SKU. Select the consumable blade you need during checkout (porcelain, ceramic, stone, masonry and similar grades). If you already have a compatible 350mm blade with the correct bore, use that.
Use it for bathroom and kitchen tiling, roof tiles, patio slabs, granite and marble work, limestone, building blocks and similar concrete-based products — once the right blade is fitted.
Specification
| Spec | Detail |
|---|---|
| Product | 1000mm 110v tile / bridge saw bench (bench only) |
| Voltage | 110v |
| Maximum cutting length | 1000mm |
| Blade capacity | 350mm (blade not included) |
| Typical blade bore | 25.4mm (confirm against the blade you add) |
| Maximum cutting depth | 110mm (depends on blade fitted) |
| Head | Swivel-mounted, up to 45° |
| Rail system | Dual rigid stainless steel rails with linear bearings |
| Height adjustment | Handwheel on cutting head |
| Table | 1000mm cutting table, extending legs |
| Transport | 4 carry handles (2 each end) |
| Typical weight | ~120kg (confirm on dispatch note; model may vary) |
| Typical basis | Red Band MB100-class 14" bridge saw or equivalent |
| Included | Bench, rails, head, legs, handles |
| Not included | Diamond blade, transformer, water supply fittings beyond the machine as supplied |
| Consumables | Add compatible 350mm blade at checkout |
Features
Product features
Built as a contractor cutting station, not a boxed “saw with a generic blade”. The bench does the accuracy work; you choose the consumable.
Key features
- Bench only — no blade, no wear deposit. Pay for the machine, then add the blade grade the job actually needs.
- 1000mm table for large-format floor tile, slab and long rip cuts without flipping the piece halfway.
- Swivel head to 45° for mitred edges on worktops, steps and external corners.
- Linear bearings on two stainless rails keep the head from drooping over the full travel — that is what makes the cut look hired-in, not site-bodged.
- Handwheel height control so depth is set once and repeated across a batch.
- 110v site-standard motor for principal-contractor electrical rules. Transformer is an optional add-on.
- Extending legs and four carry handles so it goes from van to compound without a second pair of hands every time.
- Material range once the right blade is on: ceramic, porcelain, roof tile, natural stone, masonry, concrete slab, block, granite, marble, limestone and similar.
- Checkout consumables: pick porcelain, ceramic or masonry-grade 350mm blades in the basket instead of hoping the bundled blade survives the first metre of porcelain.
