2nd Fix Nail Gun Hire
Known as a brad nailer or finishing nail gun
These second fix nail guns are gas-driven cordless nailers for use with 16 gauge nails between 15mm and 64mm in length. They are ideal for completing high volumes of work on site. Brad nailers are for the more delicate and visible finishing work after internal surfaces are installed. They apply neat fixings for architrave, dado, skirting board, handrails, floorboards, and fixtures.
These finishing nail guns feature tool-less nail jam clearing and a misfire inhibitor for smaller length nails. They have twin LEDs that light the work area for maximum visibility, and the soft tip nose and adjustable depth feature ensure precision and a high-quality finish. These nailers also have soft ergonomic grips for high degrees of handling and manoeuvrability. The cordless design of these nail guns allows you to work anywhere without the restriction of power cables or air hoses. The magazine has a capacity for 100 nails, and a 30-minute charge gives you enough battery power to make 4000 shots. These brad nailers come supplied with a 240v battery charger, battery and carry case.
You must wear the appropriate safety equipment when using these nail guns, including safety goggles and protective gloves. Keep well away from the firing point when the nailer is switched on to avoid injury. You can book a nail gun hire online or over the phone and then collect the machine from your nearest store at the start of the hire, or we can deliver.
Based on: Makita GF600SE Brad Nailer / Finishing Nailer - 2nd Fix Nail Gun
Battery Type: Li-ion
Battery Ah: 1.0
Charging Time: 30 min
Work amount on a single battery charge: 4,000 shots
Work amount per fuel cell: 1,000 shots
Magazine Capacity: 100
Vibration K Factor: 1.5m/sec²
Vibration no Load: 3.5m/sec²
Please note: This product description and specification is based on the model most widely stocked across our network of partner stores. Alternative brands of equivalent specification may be supplied based on location and availability.